DESIGNSPARK FORUMS

请问圆柱体打出来棱角很明显,如何设置可以改善此问题

Guten Tag Kann mir jemand Sagen wie man ein Groses ``Sechs``eck mit einem Kleinen ``Sechs``eck verbinden Kann? Wandstärke 5 mm  Solte eigentlisch wie eine Schüssel sein ( Siehe Foto)

Bonjour, j'ai un problème avec la nouvelle version 6.0.2, quand je transfère sur Cura une pièce avec des arrondis ça me met un message d'erreur comme quoi il y a des défauts! Aucun problème avec une pièce basique sans arrondis! La version 5 était vraiment mieux !!! Pouvez-vous m'aider. Merci

I am attempting to measure the power consumption of a server for an experiment I am running. Currently, I am looking at utilising a GPM-8213 Power Meter with a GPM-001 Power Meter Test Fixture. Would there be a more cost-effective way of doing this?  The voltage will be roughly 200-240V with a max current of 15A and I need to be able to connect the measurement devices to read into a separate PC, ideally suitable to be read into LabVIEW. Kind regards, Eoin   Kind regards, Eoin

Bonjour, j'ai un souci avec la nouvelle version 6.0.2 ! sur l'ancienne version, tous mes cercles créés étaient plein, avec la nouvelle version j'ai des creux entre chaque cercles, pouvez-vous m'aider. Merci

I have recently tried to make illustrations for math and physics problems and examples with DSM. I have mostly planar surfaces and occasionally there's also a cylinder, sphere or other simple 3D form which can be got easily by pulling, revolving, blending. and using the combining tools. I have used Adobe Illustrator and Inkscape, but I have learned that a 3D scene comes out much faster with a 3D program. DSM is a good one due its intuitive user interface. Some other low cost 3D programs are 100% useless because there's no transparency or all lines and curves are always shown on the top, there's no way to let them be partially behind some opaque items. Even a screenshot is mostly sharp enough for my purposes. It keeps the perspective, which vanishes in attempts to export the result as a vector image. The perspective is a huge boost for the visualizing power and the 2nd major reason to try this.  I can add some annotations with sharp lines and texts easily in a 2D drawing program. The next image presents well how complex images I need (it's an example, in math and physics it's nonsense). The problem:  All lines have the same width. They are as thin as the rendering allows. I want to make some lines or curves a little thicker, maybe the red and green ones in this case. The curves are splines.  So: How to change the width of a selected line or curve? I have already tried the following workarounds; A) make a copy and move it a little. This works if the curve is on a plane and the moving direction is selected well, but the result is poor if the curve is non-planar. Make it surface by blending the copies or simply by extruding the curve; the result is a surface which can be made solid by pulling some thickness to it. But it looks odd if there are the automatic edge curves ON. There's no way to suppress them only for a single object. B) make it solid by sweeping a small circle along the curve. This works as a single sweep only with smooth enough curves. Too high curvature and corners make this  geometrically impossible. Making it in pieces needs a huge amount of work. And even in those cases where a single sweep succeeds the effort is big when compared to drawing a curve and changing a single number like one does in 2D drawing programs.

Ver6を使用しております 例えば、あるソリッドのサーフェスより一回り大きい面をオフセットカーブを用いて作図するとき、寸法を入力後、どこかをクリックすればアクティブコンポーネントにカーブが作成されますが、Enterで確定するとアクティブでなくてもソリッドがあるコンポーネントに作図されてしまいます。 こういう細かな仕様ってどこで覚えればいいのでしょうか？チュートリアルの通りにやっているのに同じ結果にならず、こういうことで戸惑うことが多多あります。

Hi, I`m trying to create a chain using these elements.  Is there any way to make a pattern on the chain path? Thanks.  Elements-   Path-  

DesignSpark PCB怎么离线使用？目前必须在线验证后才能使用。早期是可以离线使用的。

程序运行不显示我不是机器人验证 无法正常开启软件

Hello again!Once an object is built, is it possible to scale it so that it increases its size in the 3 coordinates x,y,z?For example, I create a cylinder with a diameter of 10mm and a height of 50mm, and I want to increase it x4 to obtain a cylinder with a diameter of 40mm and a height of 200mm, but with a specific command to scale (without manually varying the initial diameter data and height).It's possible?  

Suddenly stopped starting please tell me the cause

can't register. and i can't see the 'i am not a robot' check box.please help!  

Hello guys, Iam using Designspark PCB 10, when iam trying to open Schematic filr 403 error is coming. Please provide me solution. Regards, Eswar Reddy.K