News
Subscribe
Latest Activity Stream
February 18, 2020 10:37
Upgrade brings higher lifetimes and IP ratings for CombiTac DIN housings
Aluminium DIN housings for the CombiTac modular connector range have been redesigned and now offer increased ingress protection to IP65 and IP67. In addition, lifetimes have been extended to 10,000 mating cycles.
Vector Award 2020
For the 7th time, the vector award jury is anticipating a record number of exciting energy chain applications from around the world. But be quick to enter as the competition closes on the 28th February. 1st prize is 5000 euro so don't miss out!
New Products From RS Components
February 11, 2020 15:38
Maxim’s Thermochron iButton starter kit
Starter Kit to evaluate the DS1921 Thermochron iButton temperature recording device with a Microsoft Windows-based PC. Easy Setup with USB Adapter. Compatible with other Thermochron iButton devices DS1922L, DS1922T, DS1922E, DS1923.
New Products From RS Components
February 11, 2020 15:37
EVALSTPM3X-3PH Poly-phase energy metering demonstration board
With current transformers based on the STPM33, STPM34 and STM8S903 this evaluation board will you to demonstrate energy and power calculations for power line systems of Vnom= 140 to 300 VRMS, Inom/ Imax = 5/100 ARMS, flin = 50/60 Hz ± 10%
New Products From RS Components
February 11, 2020 15:37
RSL10 Solar Cell Multi-Sensor Platform Evaluation Board
The ON Semiconductor RSL10 Solar Cell Multi-Sensor platform is a complete, low-cost solution for developing self-powered sensor nodes using harvested solar energy. Based on the RSL10 SIP- the industry's lowest power Bluetooth ® 5 radio.
New Products From RS Components
February 11, 2020 15:37
Application specific sensors on a ready to attach PCB assembly
With TEs AmbiMate sensor modules design resources are freed up and time to market accelerated by integrating the MS4 series pre-engineered, four core sensor solution for Motion / Light /Temperature / Humidity into your next product.
New Products From RS Components
February 11, 2020 15:37
EVALSTPM34, Energy Metering Evaluation Board for STPM34
The STMicroelectronics STPM34 evaluation board is a class 0.2, dual-phase meter with 2 CTs for power line systems with Vnom= 140 to 300 V(RMS), Inom/ Imax= 5/100 A(RMS), flin= 50/60 Hz ± 10% and Tamb= -40 to +85 °C.
New Products From RS Components
February 11, 2020 15:37
Evaluation Board for STWBC-MC for Wireless Battery Charging
This board supports wireless charging of Qi-compliant devices up to 15 W. It also supports proprietary fast charging modes up to 10 W. The STEVAL-ISB047V1 transmitter is based on the STWBC-MC and features a cost-effective half bridge topology.
New Products From RS Components
February 11, 2020 15:37
Renesas Op Amp Evaluation Board
The ISL28134SOICEVAL1Z 5V ultra-low noise, zero drift rail-to-rail precision op amp evaluation board contains the circuitry needed to evaluate the performance of the ISL28134 low noise chopper-stabilized op amp.
New Products From RS Components
February 11, 2020 15:36
Evaluation Board for Ultrasound Imaging Applications
STMicroelectronics STEVAL-IME009V1 is designed around the STHV800 8-channel high voltage pulser, a state-of-the-art device designed for ultrasound imaging applications. The output waveforms can be displayed directly on an oscilloscope.
First 400 VDC coupler system according to IEC
With the GP21 plug connector and the GS21 socket-outlet, SCHURTER launches the world's first UL approved IEC TS 62735-1 standardized DC coupler system designed to enable efficient DC power distribution in data centre power distribution strips & UPS.
_edited.jpg?w=72&h=72)
February 7, 2020 16:14
New White Paper - The benefits of Multi-norm Power Supplies, one circuit fits all
Worldwide variations in control circuit requirements are discussed alongside the advantages of a multi-norm power supply concept. The paper provides a solution for cross-standard (EN/IEC & UL/CSA) & standardized DC control circuits.
