- Now run the code:
Space Invaders with XinaBox and Raspberry Pi
Using the Capacitive Touch xCHIP we can play space invaders with the OD01 and Raspberry Pi.
|1||×||Raspberry Pi 2 Model B||832-6274|
|1||×||XinaBox OD01, OLED Display 128x64 OLED Display Module with SSD1306||174-3718|
|1||×||Raspberry Pi Bridge||174-3694|
|1||×||XinaBox Capacitive Touch Module for CAP1296||174-3734|
|1||×||AVX SMT OPEN ENDED CARD EDGE 10W||174-4977|
By using the XinaBox xCHIPs we eliminate the need for soldering, wiring or any specific hardware knowledge. This project demonstrates how to play Space Invaders on a RaspberryPi wih an OLED display and Capacitive Touch panel
This video shows how the hardware is clicked together
Step 1: Preparation
- Assemble the hardware as shown in the video above
- Install the LUMA OLED library, by following these instructions: https://luma-oled.readthedocs.io/en/latest/intro.html and https://github.com/rm-hull/luma.oled.
Step 2: Modify invaders.py example
- The attached code is the complete code with modification. It has only been modified at the beginning with this code:
- And in the end with this code: