How do you feel about this article? Help us to provide better content for you.
Thank you! Your feedback has been received.
There was a problem submitting your feedback, please try again later.
What do you think of this article?
Hi, I'm the Spaceman. I spend my time exploring the world of electronics for the newest and most exciting new product launches.
Here is my countdown of 5 Top products launched by RS Components recently.
Let the countdown begin...
5. Development kit for Nordic nRF52833 Soc
|
RS Stock No: (194-6358) The nRF52833 DK is an affordable single-board development kit for Bluetooth® 5.1, Bluetooth mesh, Thread, Zigbee, 802.15.4 and 2.4 GHz proprietary applications using the nRF52833 multi-protocol SoC. ECAD Model: |
4. Evaluation board for ultrasound imaging
|
RS Stock No:
(196-1817)
The STEVAL-IME009V1 is a product evaluation board designed around the STHV800 8-channel high voltage pulser, a state-of-the-art device designed for ultrasound imaging applications. The output waveforms can be displayed directly on an oscilloscope by connecting the scope probe to the relative BNCs. 16 preset waveforms are available to test the HV pulser under varying conditions. ECAD Model: |
3. Maxim DS1921 Thermochron iButton Starter Kit
|
RS Stock No:
(191-4207)
The MP23ABS1 is a compact, low-power microphone built with a capacitive sensing element capable of detecting acoustic waves together with an IC interface. MP23ABS1 has an acoustic overload point of 130 dBSPL with a typical 64 dB signal-to-noise ratio. The sensitivity of the MP23ABS1 is -38 dBV ±1 dB @ 94 dBSPL, 1 kHz. Ideal for development of wearables, smart speakers and mobile phones. ECAD Model: |
2. TE Connectivity AmbiMate Sensor Module
|
RS Stock No:
(193-2013)
TE Connectivity (TE)’s AmbiMate sensor module MS4 series provides an application-specific set of sensors on a ready to attach PCB assembly for easy integration into a host product. Design resources ECAD Model: |
1. RSL10 Solar Cell Multi-Sensor Platform Evaluation Board
|
RS Stock No:
(195-2569)
The RSL10 Solar Cell Multi-Sensor platform is a complete, low-cost solution for developing self-powered sensor nodes using harvested solar energy. Based on the RSL10 SIP- the industry's lowest power Bluetooth ® 5 radio, the RSL10 Solar Cell Multi-Sensor platform supports continuous Bluetooth Low Energy transmission of sensor information without requiring any batteries. ECAD Model: |
LIFT-OFF!
This is just a small selection of the new products introduced by RS Components during the past month. To view all new launches please click on the image below.