CEO | TEP
2 days ago
In today's tutorial, we will have a look at this temperature sensor DS18B20 which works on 1-wire protocol and is used to measure temperature from -55 degree Celsius to +125 degree Celsius.
1 month ago
74HC165 is a shift register which works on Parallel In Serial Out Protocol and is used to increase the input Pins of Microcontrollers like Arduino, PIC and Atmel etc.
2 months ago
74HC595 is a shift register which works on Serial IN Parallel OUT Protocol and is used to increase the output pins of Microcontrollers like Arduino, PIC, Atmel etc.
3 weeks ago
ATtiny85 is an 8 Pin AVR Microcontroller, designed and manufactured by Microchip. It follows RISC architecture and is capable of SPI and I2C communication.
3 months ago
L293D is an Integrated Chip (IC) used for controlling DC motors with H-bridge. It can control both speed and direction of two DC motors simultaneously.
2 months ago
Arduino UNO is a microcontroller board based on Atmega328. It is designed by arduino.cc in Italy and has 20 input/output pins in total.
In this tutorial, I am gonna discuss a new NPN Bipolar Junction transistor named as 2N2222. It has three terminals and is a current controlled transistor.
2N3904 is an NPN Bipolar Junction Transistor which is used for fast switching and current amplification. It is a current controlled transistor and small current at its base is used to drive higher current on other two terminals.
5 months ago
In today's tutorial, I am going to share a new tutorial where I am gonna throw light on basic feature of Arduino Nano. It has a microcontroller Atmega328 embedded in it, which acts as a brain of this Microcontroller board.