United Kingdom
|
Engineer of mechanical and electronic things by day, and a designer of rather amusing, rather terrible electric "vehicles" by night.
DS Level
11
DS member
Earned 10/11/2020
Community spirit
Post your first comment.
Inquisitive
Ask your first question.
Author 25
Earned 23/07/2021
All star profile
Complete your profile.
Maker
Become a member of a Maker community.
Social
Have your content shared by DesignSparkRS.
Toolbox
Download the DesignSpark Toolbox app
User support
Recognised for helping others in our Support Centre.
Project
Publish a project.
Published Content
1 month ago
A First Look at the Infineon EVALICB2FL03GTOBO1 Evaluation Board
Infineon controller IC provides a smart solution for driving UV-C germicidal tubes.
2 months ago
Building the Pollen Pi: A Pollen Indicating Stack Light Display
Combining a USB controlled stack light with a Raspberry Pi and Node-RED to display the local pollen count.
2 months ago
A Look at the ST 3.6kW SiC PFC Totem Pole Reference Design Board
Exploring silicon carbide MOSFET technology advantages, PFC and the STEVAL-DPSTPFC1 reference design board.
2 months ago
Building an AI Powered Follow Trolley Part 3: Hardware Assembly & Test
Assembling the follow trolley frame, interface PCB & writing some Python to verify correct hardware operation.
2 months ago
A Hands-On Look at the STM32 Nucleo Pack for IO-Link
An introduction to IO-Link, the STMicroelectronics evaluation kit, and an example demonstrating the interface.
3 months ago
Building an AI Powered Follow Trolley Part 2: Hardware Design
Selecting componentry to construct the follow trolley, and planning the frame design.
4 months ago
Building a Rotary Inverter Controller with a Barth lococube mini-PLC Part 3: Final Assembly & Test
Finalising the controls & enclosure assembly, completing the wiring and undertaking an exciting first test.
4 months ago
Building an AI Powered Follow Trolley Part 1: Getting Started
Getting set up with an Nvidia Jetson Nano and experimenting with Machine Learning to create a person following robotic trolley.
5 months ago
Building a PLCnext Controlled Can Crusher Part 3: Final Assembly & Test
Completing the wiring, implementing the PLC control logic and functional testing.
5 months ago
A Hands-On Look at the Cypress PSoC64 Standard Secure kit
A hardware introduction before setting up the development environment, and an example that provides seamless Amazon Web Services integration.
6 months ago
Building a PLCnext Controlled Can Crusher Part 2: Initial Assembly
In part 2 of this post, we will follow the assembly of the mechanical parts of the system, checking the component fit, making adjustments and planning the wiring.
6 months ago
Building a Rotary Inverter Controller with a Barth lococube mini-PLC Part 2: The Assembly
Assembling the control system and enclosure for a vintage aircraft rotary inverter.