DesignSpark フォーラム
このフォーラムでは、世界中のDesignSparkに登録しているメンバーと様々な技術的相談や、議論を行うことができます。また、自身のアイデアに賛同してくれるエンジニアを、世界中から探すこともできるでしょう。
英語の投稿が目立ちますが日本語の質問でも問題ありません。よく海外から片言の日本語で回答を頂いたりします。自動翻訳レベルでも結構ですのでグローバルなユーザとのコミュニケーションをお楽しみください。
お世話になります。
投影で円を別の図形に投射すると、円の点が多点になる現象があります。
どの項目の設定を直せば良いでしょうか?
小さい円の場合は多点になりません。 Hi,
I am using Design Spark Mechanical Creator. The dwg & dxf export does not capture all geometry. See screenshots below. The first image is a screenshot of a sectioned drawing in a drawing sheet in Design Spark. The circled red geometries are not all captured when the drawing has been exported to dwg or dxf file when viewed in AutoCad or Sketchup: See 2nd screenshot. In the 2nd screen shot only one of the circled geomteries were captured and rest of the same geometries were not. I have tried all possible export options aswell as both Teigha and Autocad Real dwg translators to no avail. Is this a glitch with translators? Please advise.
If I draw 4 rectangles:
I can pull the 'green areas but not the white. How do I change this? Thanks in advance. DS PCB 11.0 does not show 'auto-rename components' in Tools menu.
My design has four schematic and 472 parts in the projects. Is there some limitation?
Hi
I need help for insert, in a folder, a cartouche. I don't find the mode for create or use one of thats.
Thank.
Fabio I notice that PCB footprints are missing for most of the surface mount diodes, except for SOD80, so the common DO-214, SOD-523 etc are not there. Also some SM transistor footprints are missing. Is this a deliberate omission for the Explorer version?
Infact even the humble 1N4148 diode is not present in the pre-loaded components list.
Because the footprints are not there, the component import does not successfully run.
Did I make an error in installing the software or do I have to create these components?
我的融合功能导轨键在使用中会使整个融合面消失,查了几天的选项栏目找不出哪里的选项出错。 Hello, I need schematic and pcb of GSM800L module
this is what I see direct after start of Programm. When I click somewhere on Screen or hit a Key some Menupoints and Icons go away. What's going wrong here?
I'm trying to create a rectangle and then extend it into a 3D model.
When I enter one of the dimensions, such as ".28125" and then move to
enter the 2nd. dimension, Design Spark Mechanical changes the
".28125" to ".5". Any time I enter a dimension, the system chnages it
to another value. Plz. help. HI Forum,
Just upgraded to v.11.0. My parts library is not here, but my schematics are.
Where do I import my v.10.0 parts library?
Thank you! designSpark Mechanical 使いこなし大全 2023/2/11初判p41で 3.7.3 削除 DELキーですが
ソリッド面を指定して 削除すると隣接する面を・・・・・・と有りますが
どのメニューボタンを 選択し 複数選択するのでしょうか?
ご教授ください。
Hi,
I have subscription.
Ver 6.0.3
Exporting Files (PDF/DXF) produce files however importing these files types to Inscape/LightBurn import nothing (as if the files are empty). Files from other software are imported with no issues.
Suggestions are welcome.
Tnx
hi, i am currently unable to login to desingspark PCB 11.0 as it says it is unable to activate or check my license, could i have some help with this? 无法登陆,有没有明白的教教我最近のフォーラム投稿
円の投影による多点現象
dwg & dxf export does not capture all geometry
How do I select faces to pull?
auto-rename components not found
Cartouche
Surface mount Diode footprints
求助:关于融合功能的选择导轨键
Schematic and PCB of GSM800L module
Some Menupoints fade away after first Click with Mouse or Keyboard
I'm a newbie.
Library not transferred
DEL キー
Export PDF and DXF produce empty files
Unable to login to application
无法登陆