Lernen Sie den Umgang mit dem DesignSpark Circuit Simulator

My name is Yuji Miura. I am new to Design Spark Circuit Simulator. I have two points I don't understand. When I try to connect analogue electronic components to digital electronic components, I get the message "Cannot connect different technologies, insert a converter block". I don't know how to insert a converter block. I want to use a comparator called ADCMP501, but there is no comparator item in the Datasheet Model Builder and I don't know what to do. Can someone please tell me how to do this?

The DesignSpark Circuit Simulator software will be undergoing maintenance and it will be unavailable for approximately 30 minutes: Scheduled 27-March-2025 Start: 12:00 EDT / 16:00 UTC  

The DesignSpark Circuit Simulator software will be undergoing maintenance and it will be unavailable for the following 8-hour period: Scheduled 28-February-2025 Start: 12:00 noon ET End: 8:00pm ET

DesignSpark Circuit Simulator is a cloud-hosted and browser-based software. Users benefit from an always up-to-date software without the need to download anything. These frequent updates add new features and improve user experience. The following changelog summarises the updates on a monthly basis. https://www.rs-online.com/designspark/designspark-circuit-simulator-changelog  

The goal is to demonstrate how DesignSpark Circuit Simulator can provide a complete application development and demonstration platform, to show potential customers the value of Infineon parts in motor drive applications. Check out the article by Mike Donnelly at https://www.rs-online.com/designspark/infineon-800v-industrial-motor-drive-with-continuous-and-switching-voltage-variants  

Hmmm… can't reach this page It looks like explore.partquest.com closed the connection Try: Checking the connection Checking the proxy and the firewall ERR_CONNECTION_CLOSED

You can find our Circuit Simulator FAQ section here: https://www.rs-online.com/designspark/designspark-circuit-simulator-support-faqs Happy Designing!  

I use DesignSpark PCB and I have schematic design, so I want to import the design into DesignSpark Circuit Simulator.

I'm using the simulator for the first time to look into the pulse control of a DC motor with a frictional load using a MOSFET H-bridge.  Having experienced difficulties with the results, I have simplified the design greatly to that detailed in MAG2 which simply powers up the motor with 24V to its steady state before switching the power off.  I would expect the motor speed to decay to zero as its inertia dissipates.  Why doesn't this happen?

Hi, my name is Riccardo and I'm a new user. I'm working with the browser version of DesingSpark Simulator and I ask you if there's a funcion that creates an automatic Bill Of Materials (I'm working with very basic components, such as resistors, capacitors and leds). Thank you so much for the answers.

Although the automotive industry is moving rapidly toward electrification, there is no reason to stop improving the performance and efficiency of traditional gasoline engines. New power electronics technology from Nexperia can help with that too! Accurate fuel metering is important for robust engine control, and that translates into tight timing requirements for the fuel injector opening and closing. One method to improve the response of the injector closing is to provide a large back-voltage at the end of the injection event, to rapidly reduce the injector solenoid current. This back voltage can come from the “avalanche” of the main injector driver switch. That switch must be rated to handle repeated avalanche conditions, like the BUK9K13-60RA 240-1816 Power MOSFET from Nexperia. This fuel injector driver example shows the benefit of using that part for better timing control of fuel injector cut-off. Read the full article at: https://www.rs-online.com/designspark/quick-off-injector-driver-for-tighter-fuel-metering-using-a-nexperia-power-mosfet    

You can find Schematic and PCB reference designs for DesignSpark PCB software and live circuit simulation reference designs for DesignSpark Circuit Simulator in this reference design centre. For example, check out Siemens' article about  Tighter Fuel Metering with a “Quick-Off” Injector Driver This and more at https://www.rs-online.com/designspark/reference-designs

With a Creator or Engineer subscription, DesignSpark Circuit Simulator allows your simulations to run longer than 1 minute and upto 1 hour of server compute time. We list some key reasons why you may need an extended simulation time: Run electro-thermal transient simulations long enough for temperatures to reach steady-state, to verify reliability under real world operating conditions. Allows compute-intensive simulations, such as switching power electronic circuits, to run as long as necessary for line and load transient response tests. Monitor the behaviour of critical components to varying inputs over an extended time period, such as for vehicle drive-cycle simulations. Read all about it at https://www.rs-online.com/designspark/what-does-more-than-1-minute-of-simulation-time-allow-you-to-do  

So you've access to your DesignSpark Circuit Simulator, what next? Here, you'll find our tutorials that teach you the fundamentals, right through to more advanced features. Cover everything from the basics of using your tool to more complex subjects, such as understanding how to work with components or preparing your simulation results. If you want to enhance you learning further or communicate with other users of this tool, we recommend visiting our forum or FAQs page. We also have reference design articles. Check out the help site: https://www.rs-online.com/designspark/learn-designspark-circuit-simulator  

Have you seen the latest changes in our subscriptions landing page? https://www.rs-online.com/designspark/subscriptions-pricing-page We are now happy to offer annual payment for Creator and Engineer tiers! Annual subscription through the website also have the 7-day free trial phase available for you :) Or you can request a quote including alternative payment methods. Check it out today!