Lernen Sie DesignSpark Mechanical kennen

See more of the information you need, with DesignSpark Creator and DesignSpark Engineer Product data, environmental and lifecycle information as well as 3D models, footprints and schematics for a billion products - more info here: https://www.rs-online.com/designspark/product-design-centre

Ok, on my switch project I was getting along fine and thought I could make the whole thing without asking for help. But, although I can easily make this spacer without the splines in the form of cones or straight cylinder shapes using the revolve tool and it will likely work fine, I was wondering how I could make it look like the original. I have added a pic of the spacer and would like to know the best approach or steps to make this odd piece that will be 3D printed likely with supports. I just need a little guidance. :) I am thinking make and extrude the circle in the center then add a sketch shaped like a plus sign and extrude it for the left side. Then add another sketch for the right side but it has a step there, so make the short section and add yet another sketch to finish the right side? Thanks in advance!

Hi, why is there a green boarderd around my part? I drew the part from scratch, according to the geometry check no issues. How do I fix this I need to to be consistent with the other 10 similar parts I drew that did not have a green boarder.   Thanks  

Pozdrav  Na koji nacin mogu obnoviti pretplatu te izvrsiti uplat

After creating the sketch, DSM automatically cuts out the surface for me. How to turn it off. It used to be enough to turn off the Enable Constraint based sketching option. now it doesn't work.

Hello, I am a complete newbie to the program. Nevertheless, I created a CAD drawing of my project as part of my final thesis. Now I would like to insert this into my PowerPoint as a rotating object. Does the program offer me this option? I would then record it with OBS and then embed the video in the PowerPoint.TLDR:I need an automatic rotation of the CAD drawing

When can the program be adapted for macOS? This is the best design program for Windows. But I switched to macOS.

Hi, I can't find out how I can start to draw a line (or anyting) a spesific distance from another line (or object). I'm drawing a house, and when I want to draw a window in the wall, I want to start 1000 mm from left and 500 mm from top of the wall. How can I start at this point.  So far I'm drawing lines (1000 from left and 500 from top) and then erase them after the window is finished. I hope there is another way to do this?

The AutoCad options do not appear in my File Options panel, how can I enable them?  

HiI specifically bought a subscription to import OBJ files. But this feature never showed up. What is the problem?

図面モードで破断にした時 破断面の線を直線からジグザグ線に変更しようと  ファイル→Design Sparkオプション→図面→一般→ラインスタイルのオプション→破断ビューのクリッピングエッジを変更しても変化有りません。知っている方が居られたら宜しくお願い致します。

I would like to create two objects from one,possibly with "clip with plane". I want an upper half and a lower half. can someone help?

winodws10では正常に動作していましたが、windows11にアップグレートしてからは、DesignSpark Mechanicalを起動するとエラー表示してスタートしません。FAQを見ても１，２，３，５を確認しても解決しません。 ネット接続も問題なく、DSMだけ異常で、プロフィールを見ても問題なく、登録をやり直して承認されたメールアドレスを入力しても解決しません。  

Just an example of the Fill patch with tangent command. Not of G2 surface continuity 'A' class quality, but under the hood or of everything other than high mirror gloss finish, perfectly adaquate but that's your decision and not mine to make. If attempting this, be aware it takes a some practice to get proficient at surface modelling.     A less extreme patch with wider apart Y branches... Note the reflections.

When i try to start the DesignSpark a popup window says: "DesignSparkencountered an error during registration" , but i Swedish. What shuld i do?