United Kingdom
Other... | A B Open
I currently look after production at AB Open. I have a background in the arts, environmental conservation and IT support. In my spare time I do a bit of DJing and I like making things.
DS Level
71
DS member
Earned 09/03/2018
Community spirit 25
Earned 26/11/2019
Inquisitive
Earned 09/06/2018
Author 25
Earned 05/12/2018
All star profile
Earned 01/05/2018
Maker
Become a member of a Maker community.
Social
Have your content shared by DesignSparkRS.
Toolbox
Download the RS Toolbox app.
User support
Recognised for helping others in our Support Centre.
Project
Earned 24/09/2018
5 hours ago
Getting to grips with 3D printing basics and contributing to production of PPE for frontline staff fighting COVID-19
Setting up an Ultimaker 2, learning 3D printing basics and printing visor frames.
2 days ago
Using the CanaKit Raspberry Pi Zero W Starter Kit with a TV Hat
Setting up the Raspberry Pi Zero W and using it with a DVB TV Hat to stream TV stations around the house.
2 weeks ago
Hands-on with the Thermochron iButton Starter Kit
Getting to know the Thermochron iButton Starter Kit and using the OneWire Viewer to set up and read an iButton.
3 weeks ago
An Introduction to the OKdo IoT Air Quality Starter Kit
Setting up the kit to connect to the Okdo IoT Cloud and share air quality data with the world.
4 weeks ago
Assembling the Updated UNTZtrument 8x8 LED Button Grid Controller
Arduino compatible Monome-style controller with musical potential.
1 month ago
The Red Tin Audio Expander Part 4: Improvements for Reliability and Ease of Maintenance
Replacing the potentiometers, and adding insulation and board-to-cable connectors.
1 month ago
The Red Tin Audio Expander Part 3: Stripboard Assembly and Testing
Building the circuit on stripboard, fitting in the enclosure, testing and debugging.
1 month ago
A DIY Antenna Measurement System Part 3: Aluminium Parts and Getting to Know The Drive System
Assembling the enclosure and turntable, connecting up the ebm-past motor and controller, and testing setting speed and direction using the Drive Studio software.
2 months ago
The Red Tin Audio Expander Part 2: Researching Active Matrix Mixers and Building an Op-Amp Circuit
Researching and building an Audio Op Amp to be incorporated into an active matrix mixer.
2 months ago
Building a Valve Amplifier Part 5: Final Assembly
Building a brand new valve amplifier using the RH84 design and off-the-shelf components.
2 months ago
Building a Modular Synthesiser Part 6: Finishing Touches and Putting It to Use
Adding some refinements to the Eurorack case and using an oscilloscope to explore how the synthesiser modules operate.
3 months ago
Building a Modular Synthesiser Part 5: A Multi-Function Module
Assembling and testing the Frequency Central Product all-in-one synth module.