Electrical Designer | Penteon Corporation
I am a ticketed Electrician In Canada , I work designing shields for IOT and sensing equipment for Penteon Corporation, I also dabble in Linux programming, C++ and electronics https://www.hackster.io/Jade7272 https://www.linkedin.com/in/jade-perreault-0a396722/
1 week ago
While working with Arduino in the last few years I’ve made some interesting Shields but by far this one is the most useful. With voltages as high as 250 Volts AC powering the Arduino with one cable and an output from a relay capable of 5 Amps output.
In this article, I will demonstrate designing and making boards for a Water Flow sensor and Water Leak sensor; Board design for the home base, then tie it all together with simple programming and a bit of DIY plumbing.