DesignSpark Electrical Logolinkedin
  • Brought to you by
  • RS Components
  • Allied Electronics

May 11, 2015 15:28

Follow

SIEMENS SIRIUS ACT - Technical Reference

Buy SIEMENS SIRIUS ACT

Installation tips

With the new SIRIUS ACT push buttons and signaling devices easy handling also means easy installation. An innovative snap-on concept makes the task of installing a unit so effortless that it can be done with one hand. And because everything is so simple, SIRIUS ACT further reduces the risk of incorrect installation.

One-handed installation without special tools
  • Components can be snapped on without having to hold the other side
  • Installation also possible in a slanted position
Twisting prevented by screw fixing
  • Simple round milled holes without a groove
  • Significant time saving compared to ring nut fastening
Modular concept
  • Actuator, holder and contact modules can be ordered individually and combined freely
  • Typical device combinations are also available as compact units
  • Contact modules can be stacked onto one another

Click here to download instruction and installation manuals 

Overview of mounting depths

title

Mounting and wiring
title

Procedure
1.Remove the components of the complete unit from the packaging
2.Insert the actuating element or indicator light (A) from the front through the mounting opening of the front plate (B)
3.Fit the holder (C) from behind onto the actuating element or indicator light to lock this into place
4.Turn the screw on the holder until the actuating element or indicator light has a vibration-resistant and twist-proof fit
5.Snap the contact module(s) (D) onto the holder from behind.
Single-pole or two-pole contact modules can be mounted on the holder.
6.Mount an LED module (E), if necessary

 

Alignment tips

title

1.Alignment on horizontal guide line
2.Alignment with vertical guide line on the arrow of the holder
3.Alignment with spirit level/ruler
4.Alignment on the fixing point

Alignment variant 4 is recommended especially in the case of machine production of the mounting plates

Communication

Even when it comes to communication, the new SIRIUS ACT push buttons and signaling devices are strong performers: Besides the standard wiring, you can also connect the push buttons, switches and signaling devices directly to the controller – in the field via AS-Interface, in the control panel via IO-Link. By doing so, you can reduce wiring time and effort, minimize error source and have more flexibility for future modification and expansions. 

title

Additional technical reference

CATALOGUE – 3SU1 PUSHBUTTONS AND INDICATOR LIGHTS

Photos, graphics and CAx data free of charge for your presentation or engineering process

RS Components has not written a bio yet…

May 11, 2015 15:28

Follow