March 20, 2017 08:56
Highly versatile RF Power measurement using the SDRplay RSP2
The cost of wirelessly connecting IoT devices continues to fall rapidly thanks to the fact that Moore's Law is still just about alive and well. This means integrating more and more smart sensors to some form of low bit-rate wireless connectivity as offered by the likes of Sigfox, Weightless or LoRaWAN technologies continues to be a popular quest. This in turn means new and interesting challenges for network developers and OEMs. Network coverage, especially where 'fire and forget' or 'best endeavor' techniques are used, becomes increasingly important.
Thus the availability of low cost and reasonably accurate RF power measurement equipment is needed in the field, to allow remote monitoring prior to full deployment. As well as designing reliable antenna and transmission systems, there is also the need to analyze and indeed identify sources of interference within the spectrum allocated for the operation of such IoT networks. On both these fronts a good mid-range SDR receiver like the RSP2 from SDRplay can fulfill the need.
This video demonstrates how well the RSP2 performs over a range of frequencies and RF power levels:
The RSP2 and the RSP2pro are both available from RS:
RSP2 — SDR receiver with multiple antenna ports and external clocking feature (Product Code RS 124-9619)
RSP2pro - RSP2 receiver in a rugged metal case (Product code RS 125-7958)
Long history in semiconductors (including Texas Instruments and CSR) + co-founder of SDRplay Ltd.
CommentsLogin to comment
April 7, 2017 09:39
I'm interested to buy RSP2 and use it as spectrum analyzer. It' possible testing RF filter? How?