嘿!您似乎在 United States,您想使用我们的 English 网站吗?
Switch to English site
Skip to main content

ESP8266 连接到的免费的 EMQ X MQTT 服务器

MQTT 是轻量级的、灵活的物联网消息交换和数据传递协议,致力于为 IoT 开发人员实现灵活性与硬件/网络资源的平衡。

ESP8266 提供了⼀套⾼度集成的 Wi-Fi SoC 解决⽅案,其低功耗、 紧凑设计和⾼稳定性可以满⾜⽤户的需求。ESP8266 拥有完整的且⾃成体系的 Wi-Fi ⽹络功能,既能够独⽴应⽤,也可以作为从机搭载于其他主机 MCU 运⾏。

在此项目中我们将实现 ESP8266 连接到 EMQ X Cloud 运营和维护的免费公共 MQTT 服务器,并使用 Arduino IDE 来对 ESP8266 进行编程。 EMQ X Cloud 是由 EMQ 推出的安全的 MQTT 物联网云服务平台,它提供一站式运维代管、独有隔离环境的 MQTT 5.0 接入服务。

所需物联网组件

  • ESP8266

  • Arduino IDE

  • MQTT X: 优雅的跨平台 MQTT 5.0 客户端工具

  • 免费的公共 MQTT 服务器

    • Broker: broker.emqx.io

    • TCP Port: 1883

    • Websocket Port: 8083

 

ESP8266 Pub/Sub 示意图

ESP8266 代码编写

1.首先我们将导入 ESP8266WiFiPubSubClient 库,ESP8266WiFi 库能够将 ESP8266 连接到 Wi-Fi 网络,PubSubClient 库能使 ESP8266 连接到 MQTT 服务器发布消息及订阅主题。

#include <ESP8266WiFi.h>
#include <PubSubClient.h>
 
2.设置 Wi-Fi 名称和密码,以及 MQTT 服务器连接地址和端口
const char *ssid = "name"; // Enter your WiFi name
const char *password = "pass";  // Enter WiFi password
const char *mqtt_broker = "broker.emqx.io";
const int mqtt_port = 1883;
3.打开一个串行连接,以便于输出程序的结果并且连接到 Wi-Fi 网络
// Set software serial baud to 115200;
Serial.begin(115200);
// connecting to a WiFi network
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
 delay(500);
 Serial.println("Connecting to WiFi..");
}

4.设置 MQTT 服务器,并编写回调函数,同时将连接信息打印到串口监视器上

client.setServer(mqtt_broker, mqtt_port);
client.setCallback(callback);
while (!client.connected()) {
    Serial.println("Connecting to public emqx mqtt broker.....");
    if (client.connect("esp8266-client")) {
        Serial.println("Public emqx mqtt broker connected");
    } else {
        Serial.print("failed with state ");
        Serial.print(client.state());
        delay(2000);
    }
}

void callback(char *topic, byte *payload, unsigned int length) {
    Serial.print("Message arrived in topic: ");
    Serial.println(topic);
    Serial.print("Message:");
    for (int i = 0; i < length; i++) {
        Serial.print((char) payload[i]);
    }
    Serial.println();
    Serial.println("-----------------------");
}
 
5.MQTT 服务器连接成功后,ESP8266 将向 MQTT 服务器发布消息和订阅主题
// publish and subscribe
client.publish("esp8266/test", "hello emqx");
client.subscribe("esp8266/test");
 
6.将主题名称打印到串行端口,然后打印收到消息的每个字节
void callback(char *topic, byte *payload, unsigned int length) {
    Serial.print("Message arrived in topic: ");
    Serial.println(topic);
    Serial.print("Message:");
    for (int i = 0; i < length; i++) {
        Serial.print((char) payload[i]);
    }
    Serial.println();
    Serial.println("-----------------------");
}
 
 
 
 

MQTT 服务器的连接和测试

1.请使用 Arduino IDE 将完整代码上传到 ESP8266,并打开串口监视器

2.建立 MQTT X 客户端 与 MQTT 服务器的连接, 并向 ESP8266 发送消息

 

完整代码

#include <ESP8266WiFi.h>
#include <PubSubClient.h>

const char *ssid = "name"; // Enter your WiFi name
const char *password = "pass";  // Enter WiFi password
const char *mqtt_broker = "broker.emqx.io";
const int mqtt_port = 1883;

WiFiClient espClient;
PubSubClient client(espClient);

void setup() {
    // Set software serial baud to 115200;
    Serial.begin(115200);
    // connecting to a WiFi network
    WiFi.begin(ssid, password);
    while (WiFi.status() != WL_CONNECTED) {
        delay(500);
        Serial.println("Connecting to WiFi..");
    }
    Serial.println("Connected to the WiFi network");
    //connecting to a mqtt broker
    client.setServer(mqtt_broker, mqtt_port);
    client.setCallback(callback);
    while (!client.connected()) {
        Serial.println("Connecting to public emqx mqtt broker.....");
        if (client.connect("esp8266-client")) {
            Serial.println("Public emqx mqtt broker connected");
        } else {
            Serial.print("failed with state ");
            Serial.print(client.state());
            delay(2000);
        }
    }
    // publish and subscribe
    client.publish("esp8266/test", "hello emqx");
    client.subscribe("esp8266/test");
}

void callback(char *topic, byte *payload, unsigned int length) {
    Serial.print("Message arrived in topic: ");
    Serial.println(topic);
    Serial.print("Message:");
    for (int i = 0; i < length; i++) {
        Serial.print((char) payload[i]);
    }
    Serial.println();
    Serial.println("-----------------------");
}

void loop() {
    client.loop();
}

 

总结

至此,我们已成功使 ESP8266 连接到 EMQ X Cloud 提供的公共 MQTT 服务器。 在本项目中我们简单的将 ESP8266 连接到 MQTT 服务器,这只是 ESP8266 较为基础的能力之一,ESP8266 其实还能与各类物联网传感器相连,并将传感器数据上报至 MQTT 服务器。

接下来我们将会陆续发布更多关于物联网开发及 ESP8266 的相关文章,尽情关注。

 

EMQX 还没写个人简介...
DesignSpark Electrical Logolinkedin