Skip to main content
shopping_basket Warenkorb 0
Einloggen

Design Rules Check Error Design Spark PCB Pro 10


mssecutech

Hi, I have a question about design rule check in the PCB.

I defined the minimum gap between pads to 8mil and now I get an error message on my microprocessor:

Error between Component Pad IC5.3 (Net 'U19V') and Component Pad IC5.4, Gap is 8 needs to be 8.

Any idea, what is going wrong?

Thank you, Manfred

Teile diesen Beitrag
DesignSpark Electrical Logolinkedin