Skip to main content

Analogue Output 0-10V from IOT2020/40


PeterKlein1

Hi. I need to use an IOT2020/40 to measure a thermocouple signal and control the position of a damper for airflow. I can convert the thermocouple signal into a 0-10V and read it on the IOT2020/40. The controller on the damper needs a 0-10V input signal to set its position. What would be the easiest way to output an analogue voltage signal from the IOT2020/40? Will I need to use PWM and a low pass filter of some sort, or is there a direct way of doing it? I want to use this in an industrial cabnet, so I can't really hack it. Regards Peter

DesignSpark Electrical Logolinkedin