Students
Subscribe
Latest Activity Stream
-
@Josephs482 also not in HD, and also been expecting a proper panel sketch with all minuses and groundings, or even better full 3d. But at least 2D would do..
-
6 days ago
No HD resolution? I barelly see letters in there. Also why this is high-voltage stuff in here.. can we have a bit more simple example like small business panels, standart MCBs and RCBs. Whole internet... -
1 week ago
Another good write-up. A pity Covid-19 intervened to prevent further testing - did you video any of the tests that were performed? Looking forward to seeing how your successors get on. -
4 months ago
The learning curve is steep. This package is NOT intuitive by any means. The first thing I noticed when going to the community for answers is that this package is buggy, and questions go completely unanswered.... -
4 months ago
Hi,I am a Electrical and Electronic Engineerig student studing in The Gambia technical training institute (GTTI).I am interested in design tracking robot
May 18, 2020 11:53
Student Innovation - DEVELOPMENT OF A PORTABLE PATIENT MONITORING SYSTEM
The following report covers the development, production, testing and analysis of a Raspberry Pi vital signs patient monitoring system, intended to be used in less economically developed countries.
May 18, 2020 11:46
University of Southampton Eurobot 2020 team project update
Eurobot is an autonomous pick and place robotics competition founded in 1998. This article describes the progress for a Eurobot 2020 competition entry made by a team of students from the University of Southampton.
May 14, 2020 14:03
Project VALOR - Phase 2
Project VALOR is a master's student-led university project from The University of Southampton. Please read our article 'Project VALOR - Phase 1' prior to this if you haven't already for information on the project's conception and goals.
PowerHab Student Team - Lunar Habitat Power System Overview
In space, the demand for electrical power is not only a requirement for technology, it is a necessity for survival. Without technologies to maintain environmental conditions mimicking those at the Earth’s surface, humans could not survive in space.
Student Innovation: One Man Ceilidh Band
A University of Glasgow MEng project that makes an accordion play the sound of a full Ceilidh band. Using a Raspberry Pi 3B+ and an accordion with a MIDI output we've been able to produce a full ceilidh band during lock down.
May 5, 2020 16:17
ICRS's Sumobot 2020
Imperial College Robotics Society hosts an annual competition for UK universities called Sumobot. This article describes our second iteration of the competition, Sumobot 2020.
April 8, 2020 09:32
University of Southampton Students Developing Near-Earth Object Tracking Telescope
We are a group of 4th year engineering students at the University of Southampton, working on a project to design and construct a telescope capable of tracking and imaging the ISS and other near earth objects.
PowerHab student team from University of Strathclyde design power system for a lunar habitat
Our power system is designed to provide viable energy generation, storage and distribution to a lunar habitat and incorporate multiple subsystems to allow for redundancy should one subsystem fail.
December 20, 2019 13:32
University of Southampton team go for gold at Eurobot 2020
Eurobot is a mechatronics competition founded in 1998. The aim is to build autonomous robots which compete against each other in a timed pick and place exercise. This article details the initial stages of an entry into the 2020 competition.
October 18, 2019 15:46
Building a 3D Print Queue Automation System - Part 2
Building the key back-end functionality for automating 3D print queue management and file transfer.
September 30, 2019 11:58
Results from the UEA Arduino Competition 2018/19
UEA Engineering Society presented the Arduino Competition 2018/19 and attracted Engineering and Computing Science students to design and develop systems using Arduino kits that were sponsored by RS Components.
September 20, 2019 14:49
Building a 3D Print Queue Automation System - Part 1
The first stages in how I built a 3D print queue automation system for the iForge, the University of Sheffield’s student-run Makerspace.
6 days ago