Loading DesignSpark, please wait...

We apologise for the slowness of this page You are using Internet Explorer 6, upgrading your browser will greatly enhance your experience using DesignSpark

The gateway to online resources and design support for engineers, powered by RS ComponentsAllied

Knowledge Item

MULTI-BEAM XL Cable Receptacles, TE Connectivity

Posted by rangelina

3232 views

December 14th 2012

Multi-Beam XL™ from TE Connectivity has become a de-facto standard for modular hot-swappable power distribution connection systems. The heart of the MULTI-BEAM XL connector is the unique power contact which offers a current rating up to 43 Amps per contact, (at 30 degree C temp-rise), lower contact resistance (only 0.7 milli-ohms at end-of- life conditions) and lower mating forces than alternative designs.

The product is available in both board-to-board and cable-to-board designs. Board-to-board versions are available in solder or press-fit pcb terminations and cable-to-board versions terminate up to 8 AWG, 600V wire. Both versions are complimented by the highly modular production platform. Many custom variations in number of power and/or signal contacts can now be produced with little or no tooling investment required from the customer. Multi-Beam XL™ provides eXpandable Length and eXtra Long wipe with a minimum of 0.100 inches wipe on the shortest signal contacts and 0.200 inches of wipe on the long (make-first-break-last) power contacts.

Product video of Tyco Electronics- now TE Connectivity

For further information about the products go to MULTI-BEAM XL Connectors Overview or the official website of TE.

© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
Tyco Electronics, TE Connectivity and TE connectivity (logo) are trademarks.

Downloads

Leave a Comment